Search results

Documentation Link General Options +A Opens the General Options Dialog box. The following options are available: General : Various project options. Access : Various

will be restricted. These models are used to separate one or more feed streams into two or more discharge products. All models are available with a standard

the project before sharing of the project with parties with less license options. The image below shows 2 different views of the Model Selection access window

and press Apply. If the "Show frame around drawing bounds" option is selected on General Options Graphics tab: When placing the text, try to avoid placing

No action required Complete_Reset This option is effectively a combination of all the following SetState options. Reset_Process This will empty a pipe and

for more information. Toolbars Opens the General Options > Toolbars tab, used to switch on/off toolbars and customise toolbar buttons. See General Options

Definition for more information on the methods and constants used. Please see DSSA Data Sections for more information. The configuration options for the feeder

Ties and Tanks by use of the General Model using the demand option. Some Unit Models include options to calculate a General Demand which is then fed back

trending, etc. General-purpose functions and classes may be defined and used. This document only describes the access window for the general controller, and

RS - Displays the reactions in a summary table. User can select to display more or less fields. Individual Reactions - When a reaction file is loaded into

Page Connector for more information about this unit.) Some Access Window display / behaviour options can be set in Tools - General Options - Access Tab. The

be entitled to use any of these options in Build 139 from August/September 2022. Please see SysCAD Structure for more information on the various add-ons

saturation temperature for pure water at that pressure. In general the Saturated or Superheated Vapour options will be meaningless here. In some cases it may be

LockUp for more information. DTrack - Optional tab that is visible if Qualities - "MatTrack.Action = Create". Please see Material Tracking for more information

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of

easily identify the flash train. From Tools | General Options | Colours, switch on the Macro Model option. For more hints and troubleshooting, please see Troubleshooting

various Model Options, which include: Batch Mode - Batch precipitation in probal mode. Cooling Options - embedded or external heater options are available

made, it will apply to all projects. Please see General Options Colours See General Options Mouse for more information. If you right click on the Graphics

style and scale are specified on the General Options - Drawing tab. See Display, Drawing and Link Arrow Options for more information. Update Tear Graphics

configuration file, please see User property Calculations for more information. This option is only usable if user defined properties are present in the

copy a tag from a table, it will copy its value. For more information, please see Copying Tags for more information. Users can define their own calculations

default calculation options for projects using this configuration file. These are described below: Note: The user may still change the options in the project

in the Access window. See Class Instance Variable Display Options for more information. General keywords: ClassAsGroup: If this keyword is included within

User Guide ➔ Menu Commands ➔ Tools ➔ General Options Related Links: ETip: Graphics Window Drawing Grids The General dialog box is shown above. Each Tab

Separation Models ➔ General Separator Related Links: Solid-Liquid Separator, Solids PSD Method - Model Theory This model can be used as a general separator, especially

procedure: Step 1: Model Selection Step 2: Set up the general project and species data: General Configuration Species Configuration Species Properties

are calculated using the Standard Species Model. Please see General Bayer Data for some general discussion topics. Some Bayer properties have different calculation

material from the Tank, usually without having to use a PID or General controller. Options: The General Model (GM) may be enabled in the tank in Steady State,

or within the SysCAD Application window. The options for this can be set in General Options on the General tab page. Fixed error when inserting a new pipe

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

reports. The archive reporter is significantly faster, has more inbuilt reporting & calculation options and does not require tags to be recorded in the data

139.35250 Related Links: Reaction Block (RB) This option is used to 'hide' a percentage of one or more species from any reactions specified in the flowsheet

the following pop up menu is displayed. All the options available here are global options. All options above are explained earlier with the exception of

Configure a Ratio Controller video General Controller - the user may carry out the same procedures using the General Controller and pgm code. 1. A Ratio

Solid and the required Individual Phase Label, usually s; please see General notes for more information. Click on the 'OK' button; You can then enter data for

SysCAD in logical ways so that you can find and use them quickly. See General Options Toolbars At the bottom of the SysCAD application window there is a Status

enabled. MU - Optional tab, or multiple tabs if more than 1 Makeup Block is selected, Only visible if one of more Makeup Blocks are enabled in the Evaluation

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ General

into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. The Size Distribution

simultaneously. NB as a general rule, VLE should be called last. Sub-models may be switched on by selecting one of the On options from the drop down menu

only the species of interest. Please see Species Filter for more information on the Filter Options that are available for the species filter. By default, all

with this command. See Project Settings for more information. Solver Setup Used to set methods and options for Steady State or Dynamic projects. See Solver

page. The 'Modify' has the same three SetMethod options as the 'Create' with three additional options: None (Hide) - This will hide the configurable fields

3 sections: Profile tab - Contains general information relating to the unit. P0 tab - The second (and possibly more) section contains details of the tags

Block. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeup is enabled in the Evaluation Block. QFeed

and / or split two or more streams. When streams are mixed in a tie, a homogeneous product is produced. Makeup Blocks (one or more) may be enabled in a

Block. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Flow Evaluation Block

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Access Related Links: Access Window

View for more information. Options Open the General Options - Trends Tab, used to set display options for each trend page. See General Options Trends for

or HXSizeCalc options are chosen on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on

within a General Controller. Transfer Pull may be more suitable to these more complex "local networks". Please see Transfer Push mode for more information

is used in the Alumina industry. However the SSA quality can be used in general in any project (i.e. not necessarily Alumina only). The SSA data is described

Navigation: General Information ➔ SysCAD Structure Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 This page provides detailed descriptions

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Drawing

SysCAD_TagSelect keyword option and enter the required criteria. See SysCAD Tag Select Reports for more information. Running the General Information Report,

2024 - SysCAD 9.3 Build 139.35250 Related Links: TagList Commands, General Options TagList Introduced in Build 139, the TagList Window is for results viewing

control functions. If the user requires more complicated controls that involves data manipulation, then the General Controller can be used to assist the PID

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of

window consists of 4 or more sections, Screen2 - The first section allows the user to enable sub-models and it also contains some general information relating

the HXSizeCalc option is ticked on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default sections and variable names

The View Options allow the user to display the Species, Component and Elemental flows in columns 2 onwards in different ways. Not all options are available

below. Please click on the table headings, or use the navigation above, for more detailed information.

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default sections and variable names

The SysCAD license options are described on the SysCAD License Options page, please see this page for more information on license options available. SysCAD

selection chosen in the 'Model' field. There are a number of options. Some of these options are valid for both Steady State and Dynamic EHX blocks, and

The AQSol SysCAD TCE option and models documentation is for the latest version of SysCAD. The AQSol program can be used for general phase equilibrium calculations

Data Points options only) The following sections detail the key differences between input of Data Points and Average Data. The DataPoints options use data

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

Target. The last two options, Strict or Target, set the default option for the individual reactions. If the user wants to set the options for individual reactions

the HXSizeCalc option is ticked on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on

display both the original and some options for a balanced reaction: The user may then either: Select one of the balanced options (Fraction, Decimal or Whole Number)

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Find

Further Discussion for more information. The default access window consists of several sections: SolventExtraction tab - Contains general information relating

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

QFiltrate tab are valid even when the ShowQFiltrate option is not selected. Info tab - Contains general settings for the unit and allows the user to include

based on the actual duty. Only visible if the HXSizeCalc option is enabled. Info tab - Contains general settings for the unit and allows the user to include

Window. Options Open the General Options - Tag List Tab, used to set display options for each Tag List page. See General Options TagList for more information

enabled. MU - Optional tab, or multiple tabs if more than 1 Makeup Block is selected, Only visible if one of more Makeup Blocks are enabled in the Evaluation

is the same for all of them. The Display Option can be used to not display the labels, which results in a more compact graphical symbol. The Dynamic bar

Method for more information. This tab will be visible when the Method selected is 'Whiten Crusher'. See Model Theory - Whiten Crusher Method for more information

shows the sequence of events. See next heading for more information. FlotationCell tab - Contains general information relating to the unit. Recovery - Optional

first section contains general information relating to the tear block Tear (Dynamic solve mode) - The first section contains general information relating

access window. Refer to Access Window - Selection Buttons for more information. Fields in a General Controller can be declared as Concealed variables. They can

flowsheet to the size specified on the Graphics page of General Options (Menu command: Tools - general Options). Link Tags Show all Link tags: This command will

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

connected for the unit to operate. Please see General Description or Notes in the Inputs and Outputs section for more information on washer connections based

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

user can choose what material should be discarded. Some of the options are described in more detail here with some examples. Available in the following Discard

"TCPIP=Enabled" under [GENERAL] in syscad.ces.ini. Optionally change the default IP Address and/or TCPIP Port. Push OK button. Select the menu option Actions | Start

page. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Evaluation Block on

Block. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Evaluation Block. DB

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

copy a tag from a table, it will copy its value. For more information, please see Copying Tags for more information. Users can define their own calculations

consists of 2 sections: Events tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user

symbol. The colours and different status indicators are described in General Options Colours. Each unit type has its own default Quick View list configuration

for reporting. Please see Find Results List and Find Results Report Options for more information. Other example use of Find Query are: Search the project

Checkbox Online* ; True or False EnumDropList Options{Acid,Basic,Neutral} ; Define the EnumDropList options Options OperatingMode* ; Set the variable to use

enabled. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeup is enabled in the Evaluation Block. QFilterFeed

Recommended ways to activate/deactivate area(s) from within SysCAD: From a General Controller (PGM), using the InitialisePreStart trigger subroutine. Via the

["P_011.Qm (t/h)"] QueueProfile tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user

configuration. ScheduledEvents tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of

highlighted in the Secondary Selected colour, which can be set on the General Options Colours page. Controlled Variables are those writable variables (in

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default sections and variable names

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

units, solvent extraction units, and more. The Side Calculation, or the red control volume, is used to read one or more streams and perform a specific calculation

colour options are Black, Grey (Dark), Light Grey, Off-White and White. The background colour scheme can be changed: From Tools - General Options - Colours

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of

industry. However the SSA quality can be used in general in any project (i.e. not necessarily Alumina only). For more information, please see Specific Surface

industry. However the SSA quality can be used in general in any project (i.e. not necessarily Alumina only). For more information, please see Specific Surface

condensing steam heater. Environmental heat loss options are included. There are different user selectable options to describe precipitation rate. Residence time

set some general options. TCE tab - This tab allows the user to choose the corresponding PHREEQC Model Configuration unit and set other TCE options. QFeed

Project Configuration for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

user to set some general options. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled

for more information. The tabs and variable names are described in detail in the following tables. OLIReactor tab - This first tab contains general information

configuring the General Model. SysCAD will then not automatically change the stream order, but will retain the user defined priorities. Please see General Model

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

tables. PHREEQCReactor tab - This first tab allows the user to set some general options. RB - Optional tab, only visible if the Reactions are enabled in the

choose the corresponding OLI Model Configuration unit and set some general options. DInput tab - This tab allows the user to set the final conditions,

read/write (GET/SET) tags used by models (e.g. PID controller, PGM files - General controller). NOTES: The list is built during the first iteration of a project

specify this sieve series is to use the Q option, with a Q-value of 1.0 Refer to Size Configuration for more detail on sieve series construction. The Alumina3

Train. General Demand The Direct Contact Heater expects to be connected to a Steam Feeder in Demand mode. See Example under Model Theory for more information

and unmapped species TCE Configuration Options - This page documents the extra configuration file (cfg) options required when using TCE Add-On in SysCAD

change the preferences at any time. In SysCAD, from menu Tools > General Options on the General Tab. If Notepad++ was installed properly, then user may simply

unit and set other TCE options. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in

Navigation: Main Page ➔ General Information Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 SysCAD is a powerful and versatile plant

choose the corresponding PHREEQC Model Configuration unit and set some general options. DInput tab - This tab allows the user to set the final conditions,

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of

NOTE: This option is enabled if the "Prompt to save before solve if models added/removed" option is ticked in the General Options - Generals Tab.

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

Project Configuration for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

will be processed more quickly within SysCAD and hence is preferred to entering TSpline data. Please refer to Entering Spline Data for more information. See

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

the user specifies more than a single downtime event, then there will be additional tabs: T2, T3, etc. Info tab - Contains general settings for the unit

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

events if sub model options are switched on. See next heading for more information. BatchCentrifuge tab - This first tab contains general information relating

Basefiles folder. Please see SysCAD Installation Instructions for more information. In general, projects will upgrade smoothly between Major Builds with little

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

only visible if Rxns.Option = CRB. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled

generally no need for more than 50 segments and typically 30 to 50 is sufficient for accuracy. There is an option to add damping. In general damping is not required

through one or more heat exchangers. This model allows the user to embed these heat exchangers as part of the model. (This is often more efficient when

from the PGM). GetTagListCon tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user

into the following types: General purpose - e.g. Tank, Pipe, Feeder, Tie, General controller and PID controller. These general models can be used in conjunctions

slightly off-alignment. For Example: To change the Grid size, goto Tools|General Options|Graphics Tab (Graphics). The redraw button can be used to update the

later. The following TCE Add-On options are currently available in SysCAD. Please see Thermodynamic Calculation Engines for more information. AQSol ChemApp

configured to prevent this behaviour. Where two or more streams, all with the same quality models mix, then the general rule is to use a mass weighted mean when

to long and complex control logic within a General Controller. Transfer Pull may be more suitable to these more complex "local networks". Rules applied to

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

summarised in the table below, Common Options for Variable declaration. A list of all options is given at: All Options when Declaring variables. Users may

please see Project Upgrade for more detail. Shell and Tube Heat Exchanger 2 New Shell and Tube 2 Evaporating Mode New options added to internally bypass a

into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. There is a set of

profile. This page will only appear if the ShowLoading option is ticked. Info tab - Contains general settings for the unit and allows the user to include

Related Links: Getting Started, Licensing Please see SysCAD License Options for more information. SysCAD uses a software based licensing system developed

below. Please click on the table headings for more information, or see Build 139 Release Notes for a more detailed summary.

enabled in a unit when the user enables the tickbox for SplitThermal under Options as shown below: A new Tab page becomes visible, SplitT, that the user can then

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

unit and set other TCE options. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in

physically realistic. For all the above options the heat flow is displayed. The Heat Flow is displayed for all options and heat flow from the juice screen

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

set some general options. TCE tab - This tab allows the user to choose the corresponding OLI Model Configuration unit and set other TCE options. QFeed -

New, Build 137 Revision History, Upgrading Projects SysCAD 9.3 Build 137 general release was 31 October 2017, but was used selectively from June 2017. Build

a built-in Water Flash reaction and has limited splitting options. Makeup Blocks (one or more) may be enabled. This allows the user to control the addition

Navigation: General Information ➔ License Options Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 Related Links: Licensing Within a client's

physically realistic. For all the above options the heat flow is displayed. The Heat Flow is displayed for all options and heat flow from the mud filter to

Project Files for more information. The available template files are stored in SysCADXXX\Basefiles folder. PGM and MP files - As the general model or model

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

only visible if Rxns.Option = CRB. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled

point The first two options allow the user to set the cut point without any further knowledge of the cyclone. The next three options require the user to

enabled. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one or more Makeups are enabled in the Evaluation Block. DB

reports. The archive reporter is significantly faster, has more inbuilt reporting & calculation options and does not require tags to be recorded in the data

Project Configuration for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

for more information. The tabs and variable names are described in detail in the following tables. OLISample tab - This first tab contains general information

a warning. On a slow machine, you can increase the Timeout from the General Options dialog The approach in most examples (Open a new SysCAD, open the project

an installed copy of HSC Chemistry for Windows with a valid license. For more information on the Licensed Software HSC Chemistry from Outotec, contact

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

on your license options are: Notepad++ - It is free to download and install under the GPL (GNU General Public License). HSC - For more information on the

user to set some general options. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled

full Solid-Liquid Separator is used for General Separator and Evaporator, please see Solid-Liquid Separator for more information on theory and method. The

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

Section ➔ Track Related Links: Common Content Section This option is used to 'track' one or more species in a project. e.g. if the user has different feed

Section ➔ Track Related Links: Common Content Section This option is used to 'track' one or more species in a project. e.g. if the user has different feed

choose the corresponding AQSol Model Configuration unit and set some general options. DInput tab - This tab allows the user to set the final conditions,

set some general options. TCE tab - This tab allows the user to choose the corresponding AQSol Model Configuration unit and set other TCE options. QFeed

would require additional add-on (and license option) to run. See Example Projects and Project Structure for more information. This folder contains files required

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

"Apply Tag Change in PGM files" tickbox has been selected from the General Options Project dialog box. The Change Tag command will also result in tags

Navigation: Models ➔ Statistical Models ➔ General Statistics This model is for Dynamic simulation only. The General Statistics unit operation can be used to

the required flow (e.g. Set Tag Controller, PID Controller or General Controller). General Demand: The required flow will be calculated and a warning will

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

and LG_Ratio are important parameters to consider. See Cooling Tower for more information on the definition of these fields. Water loss due to Drift, cycles

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

Fix the database for any issues and try again. Please also see general notes for more information.

described in this section. The general solubility information shown in the access window of pipes, tanks, etc. is described in General Solubility Information in

for each case where multiple options are available. The databases in this folder will be used to build a list of options presented to the user by the utility

and Ratio Controllers Section 7 Merging and Modifying Projects Section 8 General Controllers Section 9 Makeups and EHX Section 10 Graphics Window and Bulk

set some general options. TCE tab - This tab allows the user to choose the corresponding ChemApp Model Configuration unit and set other TCE options. QFeed

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

window or in General Options Access tab page. New option for using Enter key as short cut for OK button. This can be set in General Options Access tab page

quality image. Printing Header can be customised, this is done via General Options - Graphics - Title Text for Print Graphics. For some users this doesn't

for each case where multiple options are available. The databases in this folder will be used to build a list of options presented to the user by the utility

filter for mass options. Build 23979: For General Separator Density split method add SolidsBypass option and new Lynch separation curve option. Build 137 is

Feeder model - Temperature & Pressure Requirements for more information. There are now several options for the interpolation method to be used when performing

events if sub model options are switched on. The default access window consists of several sections, UnderflowWasher tab - Contains general information relating

choose the corresponding ChemApp Model Configuration unit and set some general options. DInput tab - This tab allows the user to set the final conditions,

an error. Summary of the Excel Report keywords used in SysCAD: NOTES The Options may be provided in any order and are not case sensitive. Make sure when

versions in Build 138: Model Configuration - Used to define and view various options for the selected TCE database, including management of mapping of SysCAD

ScdFilter: Discontinued. See ScdFilter for more information. ScdCompression: Discontinued. See ScdCompression for more information. ScdConversion: Discontinued

On and ElemAudit.On options. The example above shows both the class definition and the use of Class in the same PGM file. In general, if the Class is useful

of 4 people. As SysCAD training is interactive, the smaller the class, the more beneficial the training will be. We use software that allows the trainee

Window, and enable 'SplitFlows' under the Options heading; Click on the 'Split' tab and select the 'General' option from the Operation drop down list; The

file in a General Controller for use in a project, do the following: In a project, insert a General Controller. On the access window of the General controller

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

are new options. These may not match your preferences, or what you are used to in SysCAD 9.2. You can review these settings in General Options. The most

user to set some general options. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

understood, single stage applications. Please use the more robust Falling Film Evaporator 2 for multi-stage and more complex operations. A schematic of the unit

boxcar delta parameters need to be changed. This is available in the Options - General - Project tab page. You can enter a filename to which statistics will

is used to optimise the value of the gain for a PID controller DropList Options{"Maximum Gain", "Minimum Gain", "Geometric Mean"} Class Class_OptimiseGain

Window) Use options without the word "custom" for auto sorting; Use options including the word "custom" for manual sorting by phase; Use option "Custom" for

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of

$Prj\MessageLog.csv tick box on the Message Window Options Tab. By default this option is disabled. If this option is enabled, then SysCAD will create the MessageLog

Block. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Evaluation Block. QEBFeed

files and Notepad++ to edit other text files. These options can be changed using the General Options command. There are a number of settings that enable

for version 1.0.0, replace the correct name as needed. Open SysCAD General Options and set VSCode as the default PGM editor: Note: VS Code is normally

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

below: Internal: These are actions initiated by a SysCAD unit, such as a General Controller, PID unit, Profiler, etc. They may also be imitated by the user

Dynamic Tear recovery options have been improved. Refer to Solver Setting - GlobalTear for explanation of the new fields and options. These improvements

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

Changes Detected - Save Project. This option can be switch on/off in the General Options - General Tab. Added option to allocate graphics page to user-defined

New, Build 138 Revision History, Upgrading Projects SysCAD 9.3 Build 138 general release was 06 June 2019, but was used selectively from April 2019. Build

ini renamed to "Options.Project.ini" "Scd_PrjAccessFmts.ini" renamed to "Options.AccessFormats.ini" "Scd_Lay.ini" renamed to "Options.WindowArrangement

differences between these types, please refer to Network Licensing Options. General Notes on Network Licenses: Network licenses are issued for no longer

Tanks (for heat transfer) Filters and Washers (for mass separation) and many more... When solving a SysCAD project, the SysCAD Solver will build and solve

syntax separately. New Mouse Action Defaults : Changed Menu command Options | General Options | Mouse Tab | Default2 Mouse Actions Double Left Click - opens

➔ Solid-Liquid Separator Related Links: General Separator, Evaporator The Solid-Liquid Separator sub-model is used in the General Separator, Evaporator and Precipitation3

configuration. BivariateStats tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

Class_EvalPlant Tank1 ;Using DropList options - integer value is required Tank1.Unit_Operation_State = 7 ;Using EnumDropList Options, string or integer can be used

flow or temperature. Please use Copy Tag for secondary tags. If there are more than one report on the same MS Excel worksheet, please make sure the search