Search results

Documentation Link General Options +A Opens the General Options Dialog box. The following options are available: General : Various project options. Access : Various

will be restricted. These models are used to separate one or more feed streams into two or more discharge products. All models are available with a standard

the project before sharing of the project with parties with less license options. The image below shows 2 different views of the Model Selection access window

and press Apply. If the "Show frame around drawing bounds" option is selected on General Options Graphics tab: When placing the text, try to avoid placing

No action required Complete_Reset This option is effectively a combination of all the following SetState options. Reset_Process This will empty a pipe and

for more information. Toolbars Opens the General Options > Toolbars tab, used to switch on/off toolbars and customise toolbar buttons. See General Options

Definition for more information on the methods and constants used. Please see DSSA Data Sections for more information. The configuration options for the feeder

Ties and Tanks by use of the General Model using the demand option. Some Unit Models include options to calculate a General Demand which is then fed back

trending, etc. General-purpose functions and classes may be defined and used. This document only describes the access window for the general controller, and

RS - Displays the reactions in a summary table. User can select to display more or less fields. Individual Reactions - When a reaction file is loaded into

Page Connector for more information about this unit.) Some Access Window display / behaviour options can be set in Tools - General Options - Access Tab. The

be entitled to use any of these options in Build 139 from August/September 2022. Please see SysCAD Structure for more information on the various add-ons

saturation temperature for pure water at that pressure. In general the Saturated or Superheated Vapour options will be meaningless here. In some cases it may be

LockUp for more information. DTrack - Optional tab that is visible if Qualities - "MatTrack.Action = Create". Please see Material Tracking for more information

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of

easily identify the flash train. From Tools | General Options | Colours, switch on the Macro Model option. For more hints and troubleshooting, please see Troubleshooting

various Model Options, which include: Batch Mode - Batch precipitation in probal mode. Cooling Options - embedded or external heater options are available

made, it will apply to all projects. Please see General Options Colours See General Options Mouse for more information. If you right click on the Graphics

style and scale are specified on the General Options - Drawing tab. See Display, Drawing and Link Arrow Options for more information. Update Tear Graphics

configuration file, please see User property Calculations for more information. This option is only usable if user defined properties are present in the

copy a tag from a table, it will copy its value. For more information, please see Copying Tags for more information. Users can define their own calculations

default calculation options for projects using this configuration file. These are described below: Note: The user may still change the options in the project

in the Access window. See Class Instance Variable Display Options for more information. General keywords: ClassAsGroup: If this keyword is included within

User Guide ➔ Menu Commands ➔ Tools ➔ General Options Related Links: ETip: Graphics Window Drawing Grids The General dialog box is shown above. Each Tab

Separation Models ➔ General Separator Related Links: Solid-Liquid Separator, Solids PSD Method - Model Theory This model can be used as a general separator, especially

procedure: Step 1: Model Selection Step 2: Set up the general project and species data: General Configuration Species Configuration Species Properties

are calculated using the Standard Species Model. Please see General Bayer Data for some general discussion topics. Some Bayer properties have different calculation

material from the Tank, usually without having to use a PID or General controller. Options: The General Model (GM) may be enabled in the tank in Steady State,

or within the SysCAD Application window. The options for this can be set in General Options on the General tab page. Fixed error when inserting a new pipe

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

reports. The archive reporter is significantly faster, has more inbuilt reporting & calculation options and does not require tags to be recorded in the data

139.35250 Related Links: Reaction Block (RB) This option is used to 'hide' a percentage of one or more species from any reactions specified in the flowsheet

the following pop up menu is displayed. All the options available here are global options. All options above are explained earlier with the exception of

Configure a Ratio Controller video General Controller - the user may carry out the same procedures using the General Controller and pgm code. 1. A Ratio

Solid and the required Individual Phase Label, usually s; please see General notes for more information. Click on the 'OK' button; You can then enter data for

SysCAD in logical ways so that you can find and use them quickly. See General Options Toolbars At the bottom of the SysCAD application window there is a Status

enabled. MU - Optional tab, or multiple tabs if more than 1 Makeup Block is selected, Only visible if one of more Makeup Blocks are enabled in the Evaluation

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ General

into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. The Size Distribution

with this command. See Project Settings for more information. Solver Setup Used to set methods and options for Steady State or Dynamic projects. See Solver

simultaneously. NB as a general rule, VLE should be called last. Sub-models may be switched on by selecting one of the On options from the drop down menu

only the species of interest. Please see Species Filter for more information on the Filter Options that are available for the species filter. By default, all

page. The 'Modify' has the same three SetMethod options as the 'Create' with three additional options: None (Hide) - This will hide the configurable fields

3 sections: Profile tab - Contains general information relating to the unit. P0 tab - The second (and possibly more) section contains details of the tags

Block. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeup is enabled in the Evaluation Block. QFeed

and / or split two or more streams. When streams are mixed in a tie, a homogeneous product is produced. Makeup Blocks (one or more) may be enabled in a

Block. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Flow Evaluation Block

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Access Related Links: Access Window

View for more information. Options Open the General Options - Trends Tab, used to set display options for each trend page. See General Options Trends for

or HXSizeCalc options are chosen on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on

within a General Controller. Transfer Pull may be more suitable to these more complex "local networks". Please see Transfer Push mode for more information

is used in the Alumina industry. However the SSA quality can be used in general in any project (i.e. not necessarily Alumina only). The SSA data is described

Navigation: General Information ➔ SysCAD Structure Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 This page provides detailed descriptions

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Drawing

SysCAD_TagSelect keyword option and enter the required criteria. See SysCAD Tag Select Reports for more information. Running the General Information Report,

2024 - SysCAD 9.3 Build 139.35250 Related Links: TagList Commands, General Options TagList Introduced in Build 139, the TagList Window is for results viewing

control functions. If the user requires more complicated controls that involves data manipulation, then the General Controller can be used to assist the PID

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of

window consists of 4 or more sections, Screen2 - The first section allows the user to enable sub-models and it also contains some general information relating

the HXSizeCalc option is ticked on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default sections and variable names

The View Options allow the user to display the Species, Component and Elemental flows in columns 2 onwards in different ways. Not all options are available

below. Please click on the table headings, or use the navigation above, for more detailed information.

following shows the sequence of events if sub model options are switched on. See next heading for more information. The default sections and variable names

The SysCAD license options are described on the SysCAD License Options page, please see this page for more information on license options available. SysCAD

selection chosen in the 'Model' field. There are a number of options. Some of these options are valid for both Steady State and Dynamic EHX blocks, and

The AQSol SysCAD TCE option and models documentation is for the latest version of SysCAD. The AQSol program can be used for general phase equilibrium calculations

Data Points options only) The following sections detail the key differences between input of Data Points and Average Data. The DataPoints options use data

Target. The last two options, Strict or Target, set the default option for the individual reactions. If the user wants to set the options for individual reactions

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

display both the original and some options for a balanced reaction: The user may then either: Select one of the balanced options (Fraction, Decimal or Whole Number)

the HXSizeCalc option is ticked on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Find

Further Discussion for more information. The default access window consists of several sections: SolventExtraction tab - Contains general information relating

See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting

QFiltrate tab are valid even when the ShowQFiltrate option is not selected. Info tab - Contains general settings for the unit and allows the user to include

based on the actual duty. Only visible if the HXSizeCalc option is enabled. Info tab - Contains general settings for the unit and allows the user to include

Window. Options Open the General Options - Tag List Tab, used to set display options for each Tag List page. See General Options TagList for more information

enabled. MU - Optional tab, or multiple tabs if more than 1 Makeup Block is selected, Only visible if one of more Makeup Blocks are enabled in the Evaluation

is the same for all of them. The Display Option can be used to not display the labels, which results in a more compact graphical symbol. The Dynamic bar

Method for more information. This tab will be visible when the Method selected is 'Whiten Crusher'. See Model Theory - Whiten Crusher Method for more information

shows the sequence of events. See next heading for more information. FlotationCell tab - Contains general information relating to the unit. Recovery - Optional

first section contains general information relating to the tear block Tear (Dynamic solve mode) - The first section contains general information relating

access window. Refer to Access Window - Selection Buttons for more information. Fields in a General Controller can be declared as Concealed variables. They can

flowsheet to the size specified on the Graphics page of General Options (Menu command: Tools - general Options). Link Tags Show all Link tags: This command will

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

connected for the unit to operate. Please see General Description or Notes in the Inputs and Outputs section for more information on washer connections based

user can choose what material should be discarded. Some of the options are described in more detail here with some examples. Available in the following Discard

"TCPIP=Enabled" under [GENERAL] in syscad.ces.ini. Optionally change the default IP Address and/or TCPIP Port. Push OK button. Select the menu option Actions | Start

page. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Evaluation Block on

Block. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Evaluation Block. DB

copy a tag from a table, it will copy its value. For more information, please see Copying Tags for more information. Users can define their own calculations

Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting

consists of 2 sections: Events tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user

for reporting. Please see Find Results List and Find Results Report Options for more information. Other example use of Find Query are: Search the project

symbol. The colours and different status indicators are described in General Options Colours. Each unit type has its own default Quick View list configuration

Checkbox Online* ; True or False EnumDropList Options{Acid,Basic,Neutral} ; Define the EnumDropList options Options OperatingMode* ; Set the variable to use

enabled. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeup is enabled in the Evaluation Block. QFilterFeed