Solver Setting - Tolerances

Navigation: User Guide ➔ Menu Commands ➔ View ➔ Solver Settings ➔ Tolerances

	SS Only	Dynamic Mode Only
FS_Solver	ProBal	Dynamic	Method	Scenario	Spills	Vents	SS Monitor	SS Finder	Convergence	GlobalTear	Tears	TearTags	Tolerances	Analysis	Changes

---

The Tolerances Tabs lists all tolerance values used in various solve routines. These include both System routines and model-based routines. The user can change values in this window to help speed up convergence. Notes: In the example shown here, most of the convergence routines use the Brent Solver. The tolerances CANNOT be set for individual unit operations, only for classes of units. Any settings which have been changed from the defaults are highlighted in yellow. Reset to default by entering *. The methodology used by the Brent Solver to determine if a value is converged is as follows: D = (Br1 - Br2)/2 where: Br1 and Br2 are the previous 2 results from the Brent function where they straddle the target value. Then: TV = 2.0 * Absolute(Br2) + RT/2 where TV - Tolerance Value RT - Relative Tolerance Then if Absolute(D) <= TV, the routine is converged. Related Topics: Tolerance Testing An example is shown below: