General Options Mouse

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Mouse

General	Access	Find	Toolbars	Project	Graphics	Drawing	Colours	Mouse	Trends	TagList

---

Mouse

• Default 1 and Default 2 buttons will cause the defaults as described in the table below to be used (The above window shows Default 1).
• A message will be displayed next to the default buttons reminding users which Default is being used. Eg: if Default 2 is being used, a message "Using Default2 (Windows)" will be displayed. If user has changed some options, then the message will say: "Using Custom Selection".
• The table below describes each action:

Group	Action		Description
Graphics Mouse Button	Access Closest Unit		Open the Access Window (Properties Page) of the closest unit. The Access Window allows you view the unit's mathematical model information. Once the Access Window is opened, you can view and enter configuration data as required.	Right click	Double Left click
	Access Menu		Display the pop-up Access Menu. This allows you to either manipulate the nearest unit or access some Global commands via the Pop-up Access Menu on Graphics Window.	Control + Right click	Control + Right click
	Unit Quick View		Open the Temporary Quick View window of the selected unit.	Left click	Left click
	Unit Quick View & Pin		Open the Permanent Quick View window of the selected unit.	Control + Left click	Control + Left click
	Unit Quick View & Merge		Open the Multiple Units Quick View window of the selected unit.	Control + Shift + Left click	Control + Shift + Left click
	Model Actions Menu		Open the Unit Pop-up Access Window of the selected unit.	Shift + Left click	Right Click
	Access Closest Unit (2nd window)		Open the Access Window (Properties Page) of the closest unit as the 2nd Access window. You may have up to 2 Access windows open at any time.	Shift + Right click	Shift + Right click
	Find Connected		The "Find Connected" special function will apply to a connected FeederSink unit model only. If the FeederSink is set up with cross-page connection, it will jump to the connected Feeder or sink. If Composition fetch is used instead of cross page connection, it will jump to the "Fetch Source Unit". If this action is performed on other unit operations or a FeederSink without fetch or cross page connection, it will simply display the access window (properties page) of the selected unit.	No Default	No Default
	Find Connected & Access		The "Find Connected" part of the function will apply to a connected FeederSink unit model only. If the FeederSink is set up with cross-page connection, it will jump to and display the access window of the connected Feeder or sink. If Composition fetch is used instead of cross page connection, it will jump to and display the access window of the "Fetch Source Unit". If this action is performed on other unit operations or a FeederSink without Fetch or Cross Page connection, it will simply display the access window (properties page) of the selected unit.	Double Left click	Shift + Left click
	Add Tag to Clipboard		Add the tag name of the selected unit to the clipboard. User can then paste the information as required (such as within SysCAD or in external software such as Excel or Notepad).	Control + Shift + Right click	Control + Shift + Right click
Graphics Mouse Wheel	Wheel Action	None	Mouser Wheel has no assigned function.
		Scroll	Mouser Wheel Scroll up/down the graphics page with the turning motion. HINT: This is the recommend action. Use Ctrl + Mouse wheel for zoom.
		Zoom	Mouser Wheel zooms in/out of the graphics page with the turning motion.
	Speed	slider bar	Slowest Fastest
	Shift Key Allows Fast Zoom		Pressing Shift while turning the mouse wheel will increase the speed of scroll/zoom.
	Multiplier	slider bar	None xTimes, visible when Shift Key Allows Fast Zoom option is selected.
	Reverse Zoom Direction		Changes the zoom in and out direction of the mouse wheel, i.e. user will roll the Mouse wheel away from them to zoom OUT and visa versa for zooming in.
	Press (with Ctrl) to Zoom All		If this is selected, user can use "mouse wheel click + Ctrl" to fit the full drawing into view.
	Reset to Default		Pressing this button will reset all Options on the current tab to default settings.