IMPORTANT: The videos here supplement the SysCAD Basic Tutorial located in the install directory at SysCADxxx\Tutorial\SysCADBasicTutorial.pdf. Refer to this document for detailed instructions.
|
Navigation: User Guide ➔ Tutorial ➔ Tutorial Videos ➔ Access Window and Quick View
Latest SysCAD Version: 19 March 2024 - SysCAD 9.3 Build 139.35102
Related Links: Access Window, Quick View
Section 4 Overview
Please use these videos together with Section 4 of the Basic SysCAD Tutorial, which is distributed with the SysCAD full install.
We will continue to use the project that we constructed in Section 2 - so please open that project.
The Leach flowsheet is shown below:
Configure the Autoclave
Set Pressure and enable Vapour Liquid Equilibrium (VLE)
|
- Section 4.3: This example shows how to set up a Tank to operate at a required pressure, and also to enable Vapour Liquid Equilibrium.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 136.19154
|
Add a Gas Vent to a Unit
|
- Section 4.3: Shows you how to enable the spitter sub-model in the Autoclave and to set up the splitter as a Gas vent.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 136.19154
|
Access Window Options
Access Window Button functionality
|
- Section 4.4: Briefly describes some of the Access Window buttons functionality.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 136.19154
|
Access Window Species Tab Displays
|
- Section 4.4: Briefly describes how to customise Species displays on the Species Tab of the Access Window.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 136.19154
|
Quick View Window
Display the Quick View
|
- Section 4.5: Shows you how to display the Quick View for one or more Links or any SysCAD unit.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.13801
|
Edit Quick View
|
- Section 4.5: Shows you how to change the Quick View using the Quick View Editor.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.13801
|