Search results

to do the following: ; 1) Define the column number to use for test data ; 2) Sets the test data by executing SetTags (this is equivalent to pressing the

and [math]\displaystyle{ V_2 }[/math] Measured, Previous or Target Values in SysCAD SI Units [math]\displaystyle{ e_a = V_1-V_2 }[/math] Absolute error

For example, the user cannot configure the flash pressure required in the Flash Tank, as the Flash Train will calculate this. If the user has a Tie in a

if the user selects the 'Whiten Crusher' method. Selection/Breakage - The fields visible if the user selects the 'Selection/Breakage' method. Test Data -

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Colours NOTE: The colour layers are in the order of importance, as shown in the following

\dfrac{1}{2dev} }[/math] (if Tavg - dev <= t <= Tavg + dev) Gaussian: [math]\displaystyle{ P(t) = \cfrac{1}{dev\sqrt{2\pi}}\cdot e^{\dfrac{-(t-Tavg)^2}{2dev^2}}

Navigation: User Guide ➔ COM Automation ➔ Python Automation ➔ Example - Unit Test Framework Unit Testing is important. Running a model to compare previous

project is solved. Step 2: Insert unit operations Set Tag List and Get Tag List Step 3: Create 2 csv files, one containing the User Defined values for the

the model would give the user a warning: SFW wash loss 7.5 is out of user specified range of data points (0 to 5) User without test data may set up a simple

the user to have a large amount of data available. Test data giving the crusher product size distribution for a given feed distribution. The user is required

Solve the project in its current build SysCAD 9.2. The last released Major build in SysCAD 9.2 is Build135, user should make sure the project is solved and

SysCADxxx\BasefilesUser\Conversions.db3 SysCADxxx\BasefilesUser\Symbols\*.* SysCADxxx\BasefilesUser\SysCAD.Machine.ini SysCADxxx\BasefilesUser\SysCAD.User.xxxx.ini

requires the user to have a large amount of data available. Test data giving the Mill product size distribution for a given feed distribution. The user is required

Therefore, please take care when using 'QProd', and if necessary test the values by displaying test values from different functions. As an example, when using

may be useful if the user is in the feasibility study phase where the SysCAD flowsheet can remain untouched and many sets of test cases need to be performed

required to be able to insert these models into a project, it is required if the user wishes to use any of the PSD methods within the models. Some models require

Build " & App.VersionNumber(2) & "." & App.VersionNumber(3) Application.StatusBar = "Started " & Version 'MsgBox Version '== Test Build number, and Exit if

then the user can access the Solver Setup (ProBal) dialog box to set the solve options. If one of the Dynamic modes is selected, then the user can access

er})^2} {\operatorname{MaxI} - \operatorname{MinI}} }[/math] Examples - GC_1.value1 = 100: GetSqr(GC_1.value1,0.2) ;returns 400. Thus (10*0.2)^2 GetSqr(GC_1

value to 2 (Acid). Each item in the EnumDropList has an integer value. The names in the EnumDropList list need to be globally unique. If the user does not